Virtual Modular Synthesis From Oscillator to Output

Trace the oscillator, filter, gain and output in a virtual modular synth. Hear what changes when you move a parameter by hand, then route an envelope to that parameter and diagnose a patch that has gone quiet.

virtual modular synthesizer, oscillator, modulation routing

A modular synth patch is easier to hear when you can follow two paths. One carries audio from the oscillator to the output. The other moves a parameter over time. A filter can sit on the first path while an envelope controls its cutoff on the second.

Start with a patch you can describe in one sentence: an oscillator through a filter and gain stage to the output. Audition a note and sweep the filter. This establishes what the audio path does before you add control signals.

Next, give the sound a motion you can hear. Route an envelope to a supported filter cutoff or gain parameter and change its attack or decay. Listen to the same note while you adjust it. If the result is quiet or static, trace the routes and check the target and amount of modulation.

Tone Forge uses a graph to display both paths. That makes it possible to tell whether an edit changes the signal chain or the movement of a control.

Follow the signal the listener will hear

Start at a module that makes audio. An oscillator continues to supply a waveform as long as its playing conditions are met. Follow its connection into the next module. A mixer can combine more than one source and a filter can change the balance of harmonics before the signal reaches the output. When the patch contains two oscillators, follow both first. It is easy to hear one source through the mixer and assume the other is also reaching it. The graph shows whether both edges are present.

A useful comparison is a saw waveform into a filter, then the same waveform with a different cutoff setting. Keep the note and the output level comfortable. A higher cutoff lets more of the bright harmonics through in a typical low-pass patch. A lower cutoff can soften the sound even though the oscillator is generating the same note. If the filter is already wide open, move cutoff into a range where changing it makes an audible difference before connecting a modulator.

Give the control route a job you can hear

Pick a single destination, such as the cutoff parameter of the filter you have just heard. Set a base value that leaves room to move in either direction. Connect an envelope to a supported modulation input and compare a short attack with a long one. With the same pitch and waveform, listen to the beginning of the note. The difference is the shape of the parameter change over time. Time the release separately by listening after you let go of the note.

The connection point and the amount both matter. If a long attack still sounds immediate, trace the envelope to its destination and check the depth of modulation. Modulating gain makes a change in level easy to hear. Modulating filter cutoff usually changes the brightness instead. A shallow amount on a cutoff that is already high can sound almost static, which is useful information when you are deciding where to put the base setting.

Read a quiet patch in order

First check that audio is running and that a note is being auditioned. Then work forward from the source. Look for a connected input on the mixer or filter, a sensible level after it, and a route into the final output. Use the output monitor to see whether the patch reaches the end of the graph. If the output is active and the device is quiet, check your listening device and system volume. If the monitor is quiet, return to the small patch and add its routes back one at a time.

Apply effects after you know what the core patch sounds like. A patch with a clearly audible envelope gives you a reference when you add processing at the output. Replay the same note, then a short phrase across several pitches. Listen for a filter or effect that masks the motion you wanted to hear. The first patch walkthrough gives the steps in the editor.

Simplified Chinese editions are available for this article and the first patch walkthrough.